| MIL-B-131H |
For barrier materials - water
vapor-proof, sheet products. |
| MIL-B-4792D |
Round rubber bumper, sponge rubber,
open cell, RS12 AB, PH 7.3 to 7.4 w/ fabric cover. |
| MIL-B-81705B |
Barrier materials, flexible,
electrostatic-free, heat sealable. |
| MIL-C-10351D(GL) |
Cloth laminated & coated for
waterproof containers. |
| MIL-C-10797D(GL) |
Silicone rubber-coated glass cloth
to be used in the fabrication of stovepipe shields. |
| MIL-C-10799H |
Cloth, coated, cotton, vinyl
coated, fire & mildew resistant. |
| MIL-C-11390C |
Cloth, laminated, cotton balloon-3
ply-air-retaining, chloroprene. |
| MIL-C-12189H |
Cloth coated, butyl coated,
toxicological agents protective. |
| MIL-C-14505C |
Cloth, nylon, poly
chloroprene-coated. |
| MIL-C-15116C |
Cork sheet, bulletin board. |
| MIL-C-17415F |
Cloth coated & webbing, inflatable
boat, miscellaneous use. |
| MIL-C-19002D |
Cloth coated & strip, coated cloth |
| MIL-C-19699D(NU) |
Cloth coated (nylon taffeta) |
| MIL-C-19759E |
Cloth coated, twill nylon (low
count) |
| MIL-C-20696E |
Cloth-Coated, Polyester or Nylon,
Waterproof |
| MIL-C-25437A |
Hydraulic, self-sealing, quick
disconnect coupling assembly |
| MIL-C-26712B |
Cloth, coated, nylon,
chloroprene-coated |
| MIL-C-26861C |
Cushioning material, resilient
type, general for rolls, sheets, special die-cut
pads, or molded forms as specified |
| MIL-C-3133C |
Molded or fabricated parts of
cellular elastomeric materials |
| MIL-C-40039C |
Cloth, coated, nylon, vinyl coated |
| MIL-C-43006G |
Cloth & strip, laminated or coated,
vinyl-nylon or polyester high strength, flexible |
| MIL-C-43062D |
Cloth, coated, nylon, resin
modified butyl coated, acid & fuel resistant |
| MIL-C-43086C |
Cloth, coated, nylon, vinyl coated
(for air supported shelters) |
| MIL-C-6183B |
Cork and rubber composition sheet:
for aromatic fuel and oil resistant gaskets |
| MIL-C-7966C |
Nylon base rubber coated cloths |
| MIL-C-8068B |
Rubber-coated, fuel resistant-cloth
coated, nylon |
| MIL-C-882E |
Cloth, duck cotton Or
Cotton-Polyester Blend, Synthetic Rubber,
Impregnated, and Laminated: Oil Resistant |
| MIL-C-9074C(GL) |
Cloth, laminated, sateen,
rubberized |
| MIL-G-1086E |
Gasket material, synthetic rubber
(for bolted steel tanks) |
| MIL-G-1149C |
For gasket material including solid
rubber, 50 to 65 durometer. |
| MIL-G-12803C(MR) |
Gasket material, including cork.
This covers many grades of various materials. Does
not cover molded gaskets, rubber or plastic sheet
gaskets which are covered by other specifications |
| MIL-G-13210(CM1C) |
Rubber gasket for making gas-tight
connections in the assembly of gas mask canisters |
| MIL-G-15342E |
Gaskets, metallic, spiral wound for
boilers |
| MIL-G-16959B |
Gaskets: Metallic, Boiler,
Economizer and Superheater Handhole |
| MIL-G-17927C |
Gaskets, glass-metallic cover,
silicone core (polychloroprene on nylon) |
| MIL-G-19769B |
Synthetic rubber gaskets, oil
resistant for slide valve (for 21-inch submerged
torpedo tubes) |
| MIL-G-20078C |
Gaskets for ballistic doors &
hatches |
| MIL-G-21569B(SHIPS) |
Gaskets, cylinder liner seal,
synthetic rubber |
| MIL-G-2161OB(SHIPS) |
Gasket, heat exchanger, various
cross section rings, synthetic rubber |
| MIL-G-22050C(SHIPS) |
Gasket and packing material,
rubber, for use with polar fluids, steam, and air at
moderately high temperatures |
| MIL-G-24696(SH) |
Non-asbestos sheet gasket material |
| MIL-G-432G |
Gaskets, nonmetallic, synthetic
rubber |
| MIL-G-47197B(MI) |
Gasket, shielding,
electronic-oriented wires embedded in silicone
rubber, pressure seal |
| MIL-G-50960(MU) |
Gasket (for the indicator humidity
plug for containers) |
| MIL-G-83528A |
Gasketing material, conductive,
shielding gasket, electronic elastomer, em1/rf1 |
| MIL-HDBK-695C |
Recommended shelf life for rubber
products |
| MIL-I-14511C |
Insulation sheet, cellular,
plastic: thermal |
| MIL-I-15126F |
Insulation tape, electrical,
pressure sensitive adhesive & pressure sensitive
thermosetting adhesive |
| MIL-I-16411F |
Glass fiber insulation felt for
thermal insulation of machinery & equipment |
| MIL-I-16562A(OS) |
Expanded insulation, insulation,
synthetic, rubber-like, chemically expanded,
cellular, (sheet form) |
| MIL-I-19166C |
Glass fiber, silicone adhesive,
pressure-sensitive tape, electrical insulation tape |
| MIL-I-24063A(SHIPS)
|
Elastomeric inserts for rubber
insert sound isolation coupling (risic-1) flex
connectors |
| MIL-I-2781E |
Insulation, pipe, thermal up to
1200° f |
| MIL-I-3158D |
Insulation tape, electrical
glass-fiber (resin-filled) and cord, fibrous-glass |
| MIL-M-15562F |
Matting or sheet, floor covering,
insulating for high voltage application |
| MIL-M-910E |
Navy floor mats, cellular base,
solid cover |
| MIL-P-11719E |
¾" Preformed rubber packing for use
with pneumatic hose couplings, universal |
| MIL-P-12420C |
Plastic material, cellular,
elastomeric |
| MIL-P-14574B(MR) |
Packing (wiper ring), synthetic
rubber, cloth insert |
| MIL-P-15037E |
Plastic sheet, laminated,
thermosetting, glass-cloth melamine-resin |
| MIL-P-16332(BUORD) |
Packing: flax, graphite-coated,
waterproof, hydraulic coils |
| MIL-P-17553A(OS) |
Synthetic rubber o-ring preformed
packing, packing |
| MIL-P-19152A(OS) |
Packing, hydraulic, high pressure
(for hydropneumatic systems) |
| MIL-P-19918(AER) |
V-ring packing |
| MIL-P-24583A(SH) |
Graphitic or carbon braided yarn
packing material |
| MIL-P-2911A |
Packing assembly, hydraulic conical
and v types |
| MIL-P-5510C |
Packing, Preformed, Straight Thread
Tube Fitting Boss, Hydraulic (-65° to 160° F) |
| MIL-P-5516C |
Packing, preformed, petroleum
hydraulic fluid resistant, 160° f |
| MIL-P-81716 |
Packing, preformed, straight thread
tube fitting boss, Type II hydraulic (-65° F to
+275° F) |
| MIL-P-87175(USAF) |
Packing, preformed, petroleum
hydraulic fluid resistant, phosphonitrilic |
| MIL-R-14328B |
Rubber sheet: synthetic, medium
soft, general-purpose gasket material (for extreme
climatic conditions) |
| MIL-R-15624E |
Rubber gasket material-50 duro
(solid rubber) class i – neoprene class ii – sbr
class iii – nbr |
| MIL-R-20092L |
Rubber Or Plastic Sheets And
Assembled & Molded Shape, Synthetic, Foam or Sponge,
Open Cell |
| MIL-R-21252B(SH) |
Rubber sheet, solid, synthetic,
shipboard water evaporator gasketing |
| MIL-R-23074C(SH) |
Rubber tile, rubber-air-lead-type |
| MIL-R-25988B |
Rubber, fluorosilicone elastomer,
oil and fuel resistant, sheets, strips, molded
parts, and extruded shapes |
| MIL-R-2765D |
Rubber sheet, strip, extruded, and
molded shapes (solid) |
| MIL-R-2778B |
Rubber sheet, solid, un-vulcanized,
high graphite, gasket use, symbol 2352 |
| MIL-R-3065E |
Solid rubber, tolerance & quality
requirements |
| MIL-R-3533B |
Rubber, synthetic: sheet, strip and
molded |
| MIL-R-45036D(MR) |
Rubber, hard (ebonite), natural or
synthetic, sheet strip, rod, tubing, molded parts |
| MIL-R-46089B(MI) |
Silicone sponge (synthetic) rubber
of the closed cell type |
| MIL-R-46846A(MI) |
Synthetic rubber, heat shrinkable |
| MIL-R-47211A |
Rubber (solid), silicone |
| MIL-R-60671(MU) |
Rubber, chlorinated, natural:
powdered |
| MIL-R-6130C |
Rubber, cellular, chemically blown |
| MIL-R-6855D |
Rubber (solid) sheets, strips,
molded or extruded |
| MIL-R-70337 |
Ring, retaining, round section |
| MIL-R-7362D |
Rubber, synthetic, solid, sheet,
trip & fabricated parts, synthetic oil resistant |
| MIL-R-81090(OS) |
Rubber (solid), electrically
conductive, fuel resistant |
| MIL-R-81828(AS) |
Rubber, cholorsulfonated
polyethylene elastomer, sheet & molded shapes, ozone
resistant |
| MIL-R-83248B |
Rubber fluorocarbon elastomer, high
temp., fluid, and compression set resistant |
| MIL-R-83285(USAF) |
Rubber, ethylene-propylene |
| MIL-R-83397A |
Rubber, polyurethane, castable,
humidity resistant |
| MIL-R-83412A(USAF) |
Rubber, ethylene-propylene,
hydrazine resistant |
| MIL-R-83485(USAF) |
Rubber, fluorocarbon elastomer,
improved performance at low temperatures |
| MIL-R-8791C |
Retainer, packing, hydraulic, and
pneumatic, tetrafluorethylene resin |
| MIL-R-900F |
Rubber gasket material (solid) 45
durometer. |
| MIL-S-27332A(USAF) |
Seat cushion insert, polyurethane
foam, plastic (general spec) |
| MIL-S-2912F(SH) |
Solid synthetic rubber compound –
battery compartment. Lining-acid & oil resistant |
| MIL-S-45005C(AT) |
Seal-plain & seal encased: fluid
radial, single & multiple lip sealing member (spring
loaded) |
| MIL-S-45180D |
Sealing compound, gasket,
hydrocarbon, fluid and water resistant |
| MIL-STD-1523A |
Age controls for elastomeric
material (aerospace). |
| MIL-STD-407 |
Visual inspection guide for rubber
molded items |
| MIL-STD-417A(MR) |
Classification system & tests for
solid elastomeric materials (symbols & tests). |
| MIL-STD-670B |
Classification system & tests for
cellular elastomeric materials. |
| MIL-T-22085D |
Tapes, pressure-sensitive,
adhesive, preservation & sealing. |
| MIL-T-24503A(SH) |
Packing material, graphitic,
corrugated ribbon or textured tape and preformed
ring |
| MIL-T-27730A(ASG) |
Tape, anti-seize,
polytetrafluoroethylene, with dispenser |
| MIL-T-4053B |
Tape, pressure-sensitive, adhesive
(corrosion-resistant) |
| MIL-T-46114B |
Glass-setting tape, a composition
of uncured rubber and cotton fiber, used for
sealing glass in metal channels |
| MIL-T-5544B |
Thread compound, anti-seize,
graphite petroleum |
| MIL-T-60394A(AR) |
Tape-pressure-sensitive adhesive
film foam double-coated (for use with ammunition) |
| MIL-T-6841C |
Tape and sheet, adhesive, rubber
and cork composition |
| MIL-Y-1140H |
Yarn, cord, sleeving, cloth and
glass tape. |
